This article originally appeared in the April 2017 issue of Today's Medical Developments.
It was the cover story entitled: "Micro-Precision Machining" by Elizabeth Modic
The Microconic system benefits orthopedic bone screws, miniature precious metal components for pacemakers, and other implantables; machined surgical components made of hypodermic needle tubing; and surgical instrument components. Here’s one example – dental implants.
Production rate went from 18pph to 32pph, a 44% cost savings. In addition, a hand deburring operation was eliminated due to the cut-off being on the opposite end.
Cost of the Microconic system was recouped in 64 production hours; a $14,015 saved in direct production costs of a 10,000-piece order.
About the author: Elizabeth Modic is the editor of Today’s Medical Developments and can be reached at firstname.lastname@example.org or 216.393.0264.
Leave a Reply.
Here you will find the latest press releases, news coverage and technical information about our Microconic™ system
© 2023 Masa Tool Inc.
Microconic™, Micrograd™ and Microguide™
are trademarks of Masa Tool.
All Rights Reserved.