 Make plans now to visit Masa Tool at the IMTS 2016 Booth W-2232 and learn about our new Microconic Workholding System.
The Microconic™ work holding system is a mechanically actuated micro-workholding system for use in high precision, small diameter CNC turning applications. The system consists of two major components: The Microconic™ cartridge, replaces the standard TF20 collets and fits into your CNC machine with no modifications to the spindle required. The second component to the system is the Microconic™ collets which have capacities of 0,22mm - 10,00mm ( 0.0086" - 0.3949") and -Over-Grip collets which can open up to 4mm over the chucking diameter and run within 5 µm/.0002" TIR It's the first and only workholding system for the micro-machining industry.
0 Comments
Masa Tool was very excited to participate in in Productivity Inc's 18th Oktoberfest Tool Show. It was our first time that we had a display at the marvelous facility and marked the launch of our new partnership with a very technically oriented machinery dealer/Industrial Distributor! Our new agents in the area, High Tech Industrial, did a tremendous job of coordinating our show set-up and introducing us to some really knowledgable machine shop people.
|
AuthorHere you will find the latest press releases, news coverage and technical information about our Microconic™ system Archives
October 2021
Categories
All
|
RSS Feed
|
© 2020 Masa Tool Inc.
Microconic™, Micrograd™ and Microguide™ are trademarks of Masa Tool. All Rights Reserved. |