NEW Masa Tool offers a Comprehensive Range of Microguide EGS™ Ejection Guide Sleeves in Different Materials
The standard Microguide EGS is made of brass. Masa Tool has expanded the standard offer of Microguide EGS to include a selection of both Plastic and Stainless Steel versions.
A critical aspect to using over-grip collets is to make sure the part is ejected reliably when it is completed being machined. Due to the wide opening of the over-grip collets, parts can get jammed in the collet slot. As a result, the collet will be damaged or break when it is closed.
Every Microconic over-grip collet is supplied with a blank Microguide EGS ejection guide sleeve that you can drill to size to fit your specific part to enable the finished part to be ejected consistently without damage to the over-grip collet. The EGS is meant to be drilled through with a loose-fitting hole that will support and help guide the workpiece as it is ejected from the collet. Users can customize the Microguide EGS to match their specific workpiece and method of ejection.
EGS10-XX, Ejection Guide Sleeves - Currently available in all materials & sizes below:
EGS10-01 for UM10W-(ALL) 360 Brass
EGS10-02 for UM10V-(ALL) 360 Brass
EGS10-03 for UM10W-(ALL) 303 Stainless Steel
EGS10-04 for UM10V-(ALL) 303 Stainless Steel
EGS10-05 for UM10W-(ALL) Acetal (Delrin)
EGS10-06 for UM10V-(ALL) Acetal (Delrin)
EGS10-07 for UM10T-20 to -240 360 Brass
EGS10-08 for UM10T-245 to -325 360 Brass
EGS10-09 for UM10T-330 to -420 360 Brass
EGS10-10 for UM10T-425 to -530 360 Brass
EGS10-11 for UM10T-535 to -635 360 Brass
EGS10-12 for UM10-(ALL) 360 Brass (15mm length rear extension)
We also have a special type of guide sleeve blank designed for very long parts like this, which extends out the back end of the collet about 1/2" further to give some support.
They are our part number EGS10-12.
Here you will find the latest press releases, news coverage and technical information about our Microconic™ system