Masa Tool’s Microconic push-type F201M10 cartridge pairs with its Microconic collets
for concentricity within 5 microns (0.0002") in production use
Masa Tool’s Microconic push-type F201M10 cartridge pairs with its Microconic collets for concentricity said to be within 5 microns (0.0002") in production use. The cartridge is a micro-workholding system for use in high-precision, small-diameter CNC turning applications. The cartridge is compatible with spindles that accept F20-201 collets.
The cartridge and accompanying collet are designed to vector the chucking force directly over the holding surface, reducing the chucking force while also increasing the holding power. This reduces chucking damage on the workpiece and reduces cycle times by 20 to 40 percent, the company says.
The cartridge’s solid extended nose enables access for tooling and coolant with minimal overhang. Its core diameter is a single-piece construction that is designed to maintain 5 microns (0.002") concentricity at the extended nose tip. Used with the company’s Micrograd wrench, the cartridge features micrometer dial control of collet clamping pressure regardless of the machine’s hydraulic or pneumatic collet closing force. The cartridge is suited for small-diameter parts ranging from 0.22 mm (0.008") to 10 mm (0.3934") in diameter.
"Micro-movement" of the workpiece is reduced, resulting in a longer tool life, better finishes, fewer chatter problems, and less damage to the workpiece. The cartridge eliminates secondary operations, saves time and enables operations to be done in the subspindle. Broaching, milling, saw cutting/slotting, turning, boring and drilling can be machined in the subspindle.
Good readiing this post
Leave a Reply.
Here you will find the latest press releases, news coverage and technical information about our Microconic™ system
© 2023 Masa Tool Inc.
Microconic™, Micrograd™ and Microguide™
are trademarks of Masa Tool.
All Rights Reserved.