Make plans now to visit Masa Tool at the IMTS 2016 Booth W-2232 and learn about our new Microconic Workholding System.
The Microconic™ work holding system is a mechanically actuated micro-workholding system for use in high precision, small diameter CNC turning applications. The system consists of two major components: The Microconic™ cartridge, replaces the standard TF20 collets and fits into your CNC machine with no modifications to the spindle required. The second component to the system is the Microconic™ collets which have capacities of 0,22mm - 10,00mm ( 0.0086" - 0.3949") and -Over-Grip collets which can open up to 4mm over the chucking diameter and run within 5 µm/.0002" TIR It's the first and only workholding system for the micro-machining industry.
0 Comments
Masa Tool has developed the Microconic™ system specifically for holding workpieces from Ø0.15mm to 10mm (Ø0.006" to 0.390") in any machine that has a collet-type chuck. The system consists of two major components: The Microconic™ cartridge, which fits into your CNC machine spindle replacing the standard 5C, 16C, TF15, Tf16 TF20 , TF25 or TF37 collets, and the Microconic™ collet, which fits in the Microconic™ cartridge. Part of the standard offering of Micrconic™ collets is the UM10W Over-grip series. The UM10W over-grip series is offered in the coverage range from Ø0.5mm - 7.2mm diameter (Ø0.020" - 0.283").
|
AuthorHere you will find the latest press releases, news coverage and technical information about our Microconic™ system Archives
February 2023
Categories
All
|
Masa Tool | breaking news |
© 2023 Masa Tool Inc.
Microconic™, Micrograd™ and Microguide™ are trademarks of Masa Tool. All Rights Reserved. |